News & Events

Apr 25, 2016

SOMAFLEX OPTIMA A BRAND NEW DESIGN FOR SHORT RUN PRINTING
Apr 25, 2016

Innovation at Soma has created a completely new press design concept, responding to the latest trends in the industry.

As part of pre-project preparation, SOMA engineering experts addressed 50 major customers around the world and thoroughly analysed their opinions, suggestions and demands for modern flexographic printing presses.
In total, from its start, the development of the SomaFlex Optima has taken about 1.5 years and several patents to premiere for the first time in October at the K 2013 International Trade Fair for Plastics and Rubber in Düsseldorf.
The main customer group at which the Optima is aimed are printers already in possession of medium-sized machines, but who at the same time need to respond to the ever increasing number of short and non-recurring jobs where larger machines gradually lose their profitability. The whole model is designed with an emphasis on minimum production print costs.
Available in 2 versions Optima 620 and Optima 820 mm web width
Fast web changing from surface to reverse printing
Ability to up - grade to in line cold seal and slitting capability
Un compromised print quality from a small footprint , Gravure to Flexo conversion
Intelligent impression adjustment using Falcon II, reducing start up waste by 20%
Reduced electrical energy consumption by some 22%
Savings of 11% in gas usage for drying using a multiple fan and nozzle design
Ink cartridge system for lower ink requirements
Reduction in VOC emission of 45%
Total estimated operation saving of 18%
Mechanically, the development team focused on the rigid construction of the machine, especially the detailed properties of its functional heart – the printing module. A massive side frame in a uniform mono-bloc design with logically arranged crossbeams eliminates all vibrations occurring upon contact of rotating and fixed parts. The attribute "mono-bloc" describes the true nature of the side frame construction, where the complete side of the print module is cast, annealed, machined, painted and assembled as a whole, in order to ensure the maximum accuracy needed for high quality printing.
The Optima has been designed for a mechanical speed of 300 m/min. The average production speed of the machine when printing has a total ink consumption of approximately 8.7 g/m2 @ 250 m/min.
Finally, at the Drupa16 in May, Soma will however release a NEW version of its Optima model the Optima2.


 OptimaOptima2
Print width (in mm)  620/800 1050/1270
Speed (in m per min)300400/500
Repeat length (in mm) 240/260-600 330/360-800
Roll diameter (in mm)800/1000/1500  800/1000/1500
Roll weight (in kg)    800/1000/2000   800/1000/2000  

For more information about Soma, the Optima or its product program please contact your nearest Dynagraph Partner.

Read Less
SOMAFLEX OPTIMA A BRAND NEW DESIGN FOR SHORT RUN PRINTING
Innovation at Soma has created a completely new press design concept, responding to the latest trends in the industry.

As part of pre-project preparation, SOMA engineering experts addressed 50 major customers around the world and thoroughly analysed their opinions, suggestions and demands for modern flexographic printing presses.
In total, from its start, the development of the SomaFlex Optima has taken about 1.5 years and several patents to premiere for the first time in October at the K 2013 International Trade Fair for Plastics and Rubber in Düsseldorf.
The main customer group at which the Optima is aimed are printers already in possession of medium-sized machines, but who at the same time need to respond to the ever increasing number of short and non-recurring jobs where larger machines gradually lose their profitability. The whole model is designed with an emphasis on minimum production print costs.
Available in 2 versions Optima 620 and Optima 820 mm web width
Fast web changing from surface to reverse printing
Ability to up - grade to in line cold seal and slitting capability
Un compromised print quality from a small footprint , Gravure to Flexo conversion
Intelligent impression adjustment using Falcon II, reducing start up waste by 20%
Reduced electrical energy consumption by some 22%
Savings of 11% in gas usage for drying using a multiple fan and nozzle design
Ink cartridge system for lower ink requirements
Reduction in VOC emission of 45%
Total estimated operation saving of 18%
Mechanically, the development team focused on the rigid construction of the machine, especially the detailed properties of its functional heart – the printing module. A massive side frame in a uniform mono-bloc design with logically arranged crossbeams eliminates all vibrations occurring upon contact of rotating and fixed parts. The attribute "mono-bloc" describes the true nature of the side frame construction, where the complete side of the print module is cast, annealed, machined, painted and assembled as a whole, in order to ensure the maximum accuracy needed for high quality printing.
The Optima has been designed for a mechanical speed of 300 m/min. The average production speed of the machine when printing has a total ink consumption of approximately 8.7 g/m2 @ 250 m/min.
Finally, at the Drupa16 in May, Soma will however release a NEW version of its Optima model the Optima2.


 OptimaOptima2
Print width (in mm)  620/800 1050/1270
Speed (in m per min)300400/500
Repeat length (in mm) 240/260-600 330/360-800
Roll diameter (in mm)800/1000/1500  800/1000/1500
Roll weight (in kg)    800/1000/2000   800/1000/2000  

For more information about Soma, the Optima or its product program please contact your nearest Dynagraph Partner.

Discover more

what we do

WHAT
WE DO

Graphic industry

Find out more

EXPANDING THROUGHOUT THE 
MENA REGION

Find out more

JOIN THE DYNAGRAPH TEAM

Join us

DYNAGRAPH WORKS WITH THE 
LEADING VENDORS IN THE INDUSTRY

Our partners

WE ARE ALWAYS AT 
YOUR SERVICE

Find out more
WHAT
WE DO
EXPANDING THROUGHOUT THE 
MENA REGION
JOIN THE DYNAGRAPH TEAM
DYNAGRAPH WORKS WITH THE 
LEADING VENDORS IN THE INDUSTRY
WE ARE ALWAYS AT 
YOUR SERVICE